Φ8.0 Uluhlu lwangaphandle lweFixation Fixation - i-Tibiaaxis isakhelo esisecaleni

Φ8.0 Uthotho lweFixation Fixation yaNgaphandle – iTibiaaxis unilateral frame Featured Image

Inkcazelo emfutshane:

Φ8.0 Uluhlu lwangaphandle lweFixation Fixation - i-Tibiaaxis isakhelo esisecaleni

I-Tibiaaxis isakhelo esisecaleni yindibaniselwano enye ye-Φ8.0 yeemveliso zokulungiswa kwangaphandle.Iindlela ezahlukeneyo zokudibanisa ziyafumaneka ukuze zisetyenziswe ngokwahlukileyo.

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Iithegi zeMveliso

(Esi sakhelo sibhekiselele kuphela, utyando lwangempela luxhomekeke kwiqhekeza).

Iinkcukacha zesakhelo:

Beka izikrufu ezibini ze-5mm zethambo kwi-distal kunye ne-proximal ekupheleni kwe-humerus ngendlela ehambelanayo yoyilo lwenaliti.Nyusa udibaniso lwe-X kwaye uqhagamshele ii-struts ezimbini ze-30 ° kuyo.Emva koko sebenzisa intonga emine kwi-rod couplings VII kunye ne-Ф8 L250mm ezimbini zokudibanisa (uhlobo oluchanekileyo) ukudibanisa zonke iinqununu kwisakhelo kwaye ekugqibeleni utshixe.(Emsebenzini, ibloko yenaliti X kufuneka isetyenziswe njengesikhokelo soyilo oluhambelanayo lwe-screw yamathambo) (Ukwenzela isakhelo esizinzile ngakumbi, sebenzisa i-bar clamp VII enye kunye ne-Ф8 L200mm intonga yokudibanisa (ithe tye) yoxhulumaniso olusecaleni. phakathi kweentonga ezimbini ezidibanisayo.)

Iimbonakalo:
1. Kulula ukusebenza, indibaniselwano eguquguqukayo, inokwakha inkqubo yokulungisa yangaphandle enemilinganiselo emithathu ezinzileyo.
2. Ngokweempawu zokulungelelanisa, i-stent inokuhlanganiswa ngokukhululekile ngexesha lokusebenza, kwaye amacandelo anokongezwa kwisakhelo nangaliphi na ixesha.
3. I-PEEK yokulungisa i-clamp inceda ukunciphisa ubunzima besakhelo ngokubanzi.
4. I-PEEK yokulungisa i-clamp ine-degree ephantsi yokuphuhlisa, ukusebenza okulula.
5. Intonga yokudibanisa i-Carbon fiber yakha isakhelo esilastiki, ukunciphisa uxinzelelo loxinzelelo.

Ulungelelwaniso olucetyiswayo:

Umfanekiso weMveliso	Ikhowudi yomyalelo.	Igama lemveliso	Iinkcukacha (mm)	Qty
	20.10.0108250.300	Intonga yokudibanisa (ngqo)	Ф8, 250mm	2
	20.20.0708201.400	Intonga yokudibanisa i-VII	imingxuma emi-2 Ф8	4
	20.20.1008501.400	Ukudibanisa u-X	imingxuma emi-5 Ф5	2
	20.30.0308101.400	30 ° Isithuba	Ф8	4
	19.32.513.0501501	Isikrufu samathambo	Ф5.0×150mm	4